![[[TitleContent]]](/uploads/202112909/i202102261428541826439.jpg)
Feb
25
2021
The car bumper is one of the relatively large trim parts on the car. It has three main fun
![[[TitleContent]]](/uploads/202112909/i202102251450385490996.jpg)
Feb
25
2021
The area of flat injection molded parts is large, and the shrinkage is also large. Due to
![[[TitleContent]]](/uploads/202112909/i202102241406544015242.jpg)
Feb
24
2021
The gate design is related to the size of the plastic part, the shape of the mold structur
![[[TitleContent]]](/uploads/202112909/i202101291548386741235.jpg)
Jan
29
2021
In the process of injection mold processing, it is very important to accurately grasp the
![[[TitleContent]]](/uploads/202112909/i202101191425179961568.jpg)
Jan
19
2021
1. There are soft spots on the mold surface There are soft spots on the surface of the mol
![[[TitleContent]]](/uploads/202112909/i202101051456187587941.jpg)
Jan
05
2021
Two-color injection molding is the realization of a part with two kinds of plastic injecti
![[[TitleContent]]](/uploads/202012909/i202012281040000601130.jpg)
Dec
28
2020
The use of molds is now very extensive. In order to improve the performance of the mold ma
![[[TitleContent]]](/uploads/202012909/i202012231449427776754.jpg)
Dec
23
2020
Causes of dents 1-1 The thickness of each part of the product is different 1-2 Insufficien
![[[TitleContent]]](/uploads/202012909/i202012221038274775331.jpg)
Dec
22
2020
Jetting, also known as jetting marks and jetting drool, refers to the 65-thread-like strea
![[[TitleContent]]](/uploads/202012909/i202012181551178554418.jpg)
Dec
18
2020
When designing a plastic mold, after determining the mold structure, you can design each p
![[[TitleContent]]](/uploads/202012909/i202012141605581302742.jpg)
Dec
14
2020
The exhaust of injection mold is an important issue in mold design. Especially in rapid in
![[[TitleContent]]](/uploads/202012909/i202012071356576231478.jpg)
Dec
07
2020
1. Accept the assignment The task book for molded plastic parts is usually proposed by the