Plastic Beach Pail Bucket Mould
Basic introduction of paint bucket mould:
Number of mold cavities: 1 out 1
Mold manufacturing cycle: 45 days (generally in the mold manufacturing process cycle, the specific situation depends on the product to make a decision)
Mold injection cycle: 35 seconds
Mold standard parts: standard parts
Mould material: P20, 45#
Mold runner: hot runner
Mold design cycle: 5 days
Mold packaging: wooden box packaging
1: This involves the accuracy of the processing equipment and the perfection of the cooling cycle system. The balance of the water circulation flow will directly affect the fluidity of the molten plastic and the balance of the wall thickness of the product surface after cooling. Under normal circumstances, different water flow temperatures will cause a tolerance of 0.05 mm wall thickness.
2: The height of the zero-degree four-buick lock of the bucket mould should be 20%-30% of the overall height of the bucket body. The smaller ones tend to be 20%, and the larger ones tend to be 30%.
3: Reverse button problem: Generally, the edge of the barrel will be equipped with a link handle, and there may be reverse button around. The difficulty of this reverse button is that the product needs to be processed before demoulding, otherwise the product will be pulled directly when it is ejected. Sometimes there will be ribs around. In this case, most of them use a slanted top block, and the core is pulled through the stroke of the cylinder before the mold is ejected.
In-time response on letters, telephone calls or fax
In-time supply the mould designs
In-time communication on the technical points
In-time sending pictures for the mould machining progress and mould finishing schedule
In-time mould test and sample delivery
In-time mould delivery.
Mould one year guarantee,full life technique support