Thin wall container mould
OdinMould supplies a complete range of multi-cavity transparent container molds of different sizes. The capacity includes 100ml, 200 ml.250ml.500ml, 1000ml, large like 18 l, 25 l, 60 l, 110 l and so on. We can provide injection molding solutions for thin walled containers
Transparent containers include two types, one is a single-use food package, and usually the disposable product is an ultra-thin container with a wall thickness between 0.4 and -0.6 mm. OdinmOULD can produce 4-cavity ultra-thin container mold wall thickness 0.4 mm.
Another type of plastic container has a wall thickness of about 0.8 - 1 mm. Currently, we have a set of container molds that can be produced in seven different sizes and shapes, which are common to the lids of some containers. The entire design can be stacked on each other, which greatly covers the area of the container and greatly reduces the logistics cost.
All transparent container molds need to be polished. In order to make the container look shiny, we usually use DIN1.2738 DIN1.2344, S136 as the mold cavity core steel. If the wall thickness of the container is thick, 718 h of steel can be used to reduce the cost of the mold. We provide molds according to our customer requirements.
For more information, please feel free to contact odinmould.
Odin has made its own perfect production and management system. There are strict quality control managements in each process. We try our best to avoid mistakes, and put an end to extend mistake to the next process.
Mould Try Out inspection
When mold finish machining, fitting parting line and final assembly, it steps into tryout procedure. To a new mold, the first mold tryout is very important. By means of a complete tryout procedure, we can evaluate if the mold function works well including injection system, ejection system and side cores system and so on
During tryout, the plastic parts are samples. With proper injection parameters, we can evaluate the quality of samples and mold. After tryout, we summarize a correction list in order to obtain good parts eventually and satisfied by customer.
Mould project management.
A successful project development depends on successful project management. This includes ongoing management and monitoring project schedule on each process, full documentation of the whole process, beginning from mold fabrication and ending in preparation for production, fluent communication between internal and customer and good control of the manufacturing process.
OdinMould appoints an experienced project manager to offer clients professional recommendations, management, technical strategy formulation and implementation, as a coordinator to supervise overall project from start to end. Meanwhile, the project engineering team is capable to communicate in English without obstacle. For each new project, we set up full detailed schedule and critical control points in design, tool machining, mold trials, production and delivery.
OdinMould makes molds strictly in accordance with the standards in the prints. Mold data and project information are well recorded and filed, which greatly guarantee our future track and after-sales service. In case some problems happen to the molds, OdinMould is ready to offer clients 100% support to solve them at the first time.