Plastic Thin Wall Mould Plastic Cup Plastic Box Plastic Cup

In the Middle East, Africa and Asia, the process of urbanization and industrialization in many countries is accelerating. After consumers left their rural hometown, consumption patterns began to change. They used to buy local foods, but after they arrived at a new urban residence, they might choose to pack off-the-shelf food and beverages with highly effective, protective materials. Many other FMCG products have encountered the same situation, so the demand for thin-walled packaging (TWP) will continue to increase in these areas. However, consumer behavior fluctuates. This poses challenges and opportunities for manufacturers who want to meet the brand's needs.



Thin-walled products, the design of the mold structure points

  1. The product is simple in shape, without any upside down and touch perforation, similar to the cup, the product surface more than 3 degrees, can be designed into side-gas, oblique gas, valves and so on.

  2. 2. The rib height on the stripper plate is less than 1mm. For this rib position processing, the stripper plate can be set up. 3. Multi-cavity mold design method:

  3. (1) independent self-locking: multi-cavity independent self-locking for all shapes of thin-walled mold design, each cavity independent, core mold clamping surface into the core of the complex board.

  4. (2) Overall clamping: The wall thickness is more than 0.8mm, the machine is relatively small, it is difficult to put it in, and the integral structure is adopted, but it must be explained in advance. 4. Cavity, core structure design:

  5. (1), cavity complex plate generally uses P20 steel.

  6. (2) Single-cavity barrel structure The bottom of the cavity is empty, and it must be ensured that the press plate has steel material above 45mm height. Prevent the cavity from producing flashes.

  7. (3) Inserts are used along the edge of the cavity to reduce the cracking of the thin steel material in the cavity. (4) Gate water jacket to reduce hot runner cooling time.



Mold project: the safety cup series
Product material: polypropylenePP
Die cavity: 8 cavity,16 cavity,the 32 cavity
Mold material: 2344,H13
Die life: >800 million times
Channel type: YUDO/Master of hot runner system
Operation mode: full automatic manipulator
Stripping mode:push plate air blowing
Molding cycle: <6-7S





Odin Mold specializes in the design and manufacture of food packaging, and we mainly consist of thin-walled product molds. With years of experience and strong core technical team support, we aim to expand our business scope with the goal of the global market, and effectively combine the needs of our customers to manufacture molds.



0911-facory odin mould

Hot Tags: plastic thin wall mould plastic cup plastic box plastic cup, China, factory, manufacturers, customized, made in China, Heavy Duty Injection Plastic Crate Mould, Plastic empty wire spool injection mould, house pets plastic mould, Household Plastic Injection Trash Can Mould, Water Kettle Blow Mold, Fork Mould

Send Inquiry