Plastic table spoon injection mold
1. Daily maintenance of the mold: various moving parts such as thimble, row position, guide post, guide sleeve oiling, cleaning of the mold surface, transportation Drainage of water, which is maintained every day during mold production.
2. Regular maintenance: Regular maintenance includes the cleaning of the exhaust slot in addition to daily maintenance, trapped gas burns to the black level plus exhaust, damage, correction of worn parts, etc.
3. Appearance maintenance: Paint the outside of the mold base to avoid rust. When the mold is lowered, the fixed mold moving mold should be coated with anti-rust oil. When the mold is stored, it should be closed tightly to prevent dust from entering the cavity.
The main body and the bottom cover are assembled in the form of a double buckle. The bottom shell of the product is double-clamped, and the upper shell is inserted straight down, which is not easy
Dislocation, the product assembly gap is uniform, the process gap is 0.5MM, general plastic products are most afraid of shrinking, the screw under the product
The most obvious way to shrink the yin in the studs and ribs is to reduce the wall thickness around the screw column by 0.8-1 MM. In fact,
It is the top white. If the top white, the general polishing and stripping slope, the stripping slope of PP material products should be at least 0.5 degrees.
On the top, the stripping slope of the ABS material product must be at least 1.5 degrees or more, and the jack is designed around the product (good force Point).
Odin Mould(atplas) is a professional manufacture of gas-assisted injection mold, daily-use plastics mould, SMC/BMC mould, thin-wall injection mold, injection molding OEM,we have cultivated an excellent team and established a comprehensive system to meet different Different needs of customers.