sales@odinmould.com +86-576-81122133
Imitation Rattan Design Plastic Product Mould

Imitation Rattan Design Plastic Product Mould

Imitation rattan design plastic product mould.  As people's demands for quality of life have increased, the rattan rattan weaving frame has gradually spread from the developed countries in Europe and America to the whole world. Rattan processing is complicated and the production cycle is relatively long. Without a certain experience, the mold does not necessarily do well. Odin Mould summed up some experience sharing.

Description

Imitation rattan design plastic product mould

    As people's demands for quality of life have increased, the rattan rattan weaving frame has gradually spread from the developed countries in Europe and America to the whole world. Rattan processing is complicated and the production cycle is relatively long. Without a certain experience, the mold does not necessarily do well. Odin Mould summed up some experience sharing.

0704-18

who we are:

Odin Mould Co.,Ltd is a company with several years' experience in the manufacture of plastic custom injection moulds and tool making that offer high quality injection molds, established in 2002, located in Huangyan Taizhou City, known as “Mould Town of China”. Our plastic injection moulds comply with high quality standards, detailed mould specifications and special requirements, enabling us to offer our customers a comprehensive solution to their injection molding needs.

favtory


What can we do for you?:

1.Plastic Parts design

2.Mould design

3.Mold & Die Manufacturing

4.Plastic injection Molding



How our Mould Quality Control?


1.Mould Material Q/C

 - Mould Steel Checking(Hardness, flaw detection)

 - Mould Standard Spare Parts Checking(hardness, size, flaw checking)

 2. Mould Making Process Q/C

 - design checking (part design, mould design, mould engineering drawing)

 - Each part of mould’s size checking after machining according to 2D drawing

 - mould testing(check mould running condition and first mold testing sample)

3.Make sure that every term is according to customer's requirement.



Mould Maintenance:

a) When the mould is vacant, spray anti-rust oil

b) Clean the gate and cooling system regularly

c) Avoid to use recycled material if the mould is suitable for virgin material only

 

Hot runner system:

Yudo,Moldmaster,Mastip,Husky,Incoe, etc.

The mould steel choice:

ASSAB,Bohler ,Saarstahl,Groditz,Buderus ,Finkl,DAIDO,LKM,Baosteel etc.

p1ratten3


1. Meet the product release requirements

The parting surface, that is, the product can smoothly take out the surface of the mold. Therefore, the position of the parting surface should be selected in the part with the largest product section size, which is a basic principle.

2. Determination of position

When determining the orientation of the product in the mold, the selection of the parting surface should try to prevent the product from forming side holes or side buckles, and complicated mold structures should be avoided.

3. Ensure product appearance and quality

In order to ensure the beauty of the rattan frame products, we try our best to reduce the parting line. In general, the appearance of the surface is not allowed to have lines and other lines that affect the appearance of aesthetics; some products with concentricity requirements, all parts with the same degree of concentricity must be placed on the same side, so as to ensure their concentricity.

4. Conducive to demoulding

The mold release mechanism of the general mold is all in the movable mold. Therefore, when selecting the parting surface, the product after the mold opening should be left as far as possible in the movable mold. Therefore, for some places where it is possible to stick to the fixed mold, a fixed mold assisted demolding mechanism is often added.

p1dsdssd

Send Inquiry