Plastic injection Pet carrier mould
· Mould Name: Pet Box Mould
· Mold cavity number: 1, 2, etc.
· Mold material: S45C, P20, CuBe, etc.
· Mold life: 300,000 mold times
· Runner system: hot runner, cold runner
· Demoulding system: stripping board, thimble, etc.
· Mold operation: fully automatic production
· Mold features: good cooling system, cycle time interrupted, slider
· Plastic parts material: PP, PE
General plastic mold materials such as storage boxes and other assembly aspects: the main body and the bottom cover are assembled in the form of double buckles, that is, the bottom shell of the product has dual clips, and the upper shell is inserted straight, so that it is not easy to misalign, the product assembly gap is uniform, and the process seam The difference is 0.5M. General plastic products are afraid of microcosms. The screw posts and ribs under the product are prone to microcosms. The method is to reduce the wall thickness around the screw posts by 0.8-1MM, and then the top white. Light and demolding inclination, the demolding inclination of PP material products must be at least 1 degree, the ejector is designed around the product (the place where the force is applied), when the mold is processed: we will report to the mold, After purchasing the mold material, I will send you the picture. After the processing is completed, I will send the picture to you. Then I will report to you when the mold is assembled. The sample will be sent to you later. I will let you see us in the whole process. Process.
"24-hour service" is our promise. As long as you give me a chance, I will make you satisfied.
Our mold has a strong design team to accept: provide samples, or, three-dimensional drawings, two-dimensional drawings, mold can be quoted, you are welcome to consult and quote!