Plastic Injection Vacuum Cleaner Mould
The vacuum cleaner is a device that uses a gas pump to create a partial vacuum, generates suction, and sucks up dust from the floor or other locations. It can be divided into vertical, horizontal, and portable according to the structure.
Requirements for making vacuum cleaner molds:
1. You need to design the mold through 2D graphics, or 3D graphics, or physical patterns.
Second, in terms of material selection for vacuum cleaner molds, we need to select which kind of steel to make molds according to customer requirements.
3. There are four characteristics of the vacuum cleaner mold: smooth surface, no cracks, scratches and other phenomena. And without steel thorns
Common sense of vacuum cleaner mould:
1: Front and back mold materials of vacuum cleaner mold
In addition to the material of the vacuum cleaner shell, which has a great influence on the working efficiency of a vacuum cleaner, the front and rear membrane materials of the vacuum cleaner mold also play a key role.
2: Mould embryo of vacuum cleaner
In the process of producing vacuum cleaners, we often need to mention the mold base of the vacuum cleaner. The entire mold base supports the entire bracket of the vacuum cleaner. Therefore, a higher hardness material is required when selecting materials.
3: The number of mold cavities required by the vacuum cleaner
One or more products can be produced on the vacuum cleaner mold. We will calculate according to the size of the vacuum cleaner. At the same time, we need to prepare a mold to produce several products according to the customer's needs.
4: Flow path of vacuum cleaner mold
The flow path of the vacuum cleaner mold is divided into cold flow path and hot flow path. When we produce vacuum cleaners, we often set the hot runner according to the design. Not only can the cycle be shortened, but the product can be cured in time and ejected in time.