Foot Bath Bucket MouldThe foot bath, including the basin, is characterized in that the inner surface of the bottom of the basin is evenly provided with a plurality of spaced-apart hemispherical protrusions.
As a working principle of water + electricity, the foot bathtub replaces the traditional footbath! Because it is the working principle of water + electricity, there is inevitably the possibility of conduction. All foot baths seen on the market are one-piece. Therefore, there are two types of structure: integral and split. The integrated type is hydropower, and the safety is not as good as the split. Separate use of steam heating, water and electricity are completely separated.
General fitness equipment such as foot baths and other aspects of assembly:
The main body and the bottom cover are assembled in the form of a double buckle, that is, the product bottom shell double card, the upper shell is inserted directly, so it is not easy to misplace, the product assembly gap is uniform, and the process seam It's a good 0.5MM. The general plastic products are afraid of microcosm. The screw column and ribs under the product are prone to microcosm. A good method is to reduce the wall thickness around the screw column by 0.8-1 MM. The second is the top white. , The general polishing and demolding slope, the demolding slope of PP material products must be at least 1 degree, the top rod is well designed around the product (the place where the force is better), when the mold is processed: we will give Do mold report tracking, and then I will send you a picture after the mold material is purchased, and then I will send you a picture after the processing is completed, and then report to you when the mold is assembled, and the sample will be sent to you later, I will let You see our process throughout the process.
You can send any of kind above drawing or samples data to us ask quote
Order Manufacturing Process